Water Damage Project in Santa Paula, CA: Sink Leak to Full Restoration

When a bathroom sink leak in Santa Paula allowed water to seep into a bedroom and hallway, our IICRC-certified water-damage restoration team was on site within hours. We extracted standing water, coordinated with the homeowners’ insurance for seamless approvals, and deployed professional drying equipment. Over the next five days, we removed damaged flooring, carpet, and wet drywall—preventing mold growth and restoring the home to its pre-loss condition.

The Discovery

• A slow drip from a vanity valve had gone unnoticed until water pooled beneath the bedroom carpet.
• Moisture meters recorded levels above 30% in subfloor and drywall cavities.
• Early detection was key: every hour of standing water increased mold risk and structural degradation.

Our Process

1. Water Extraction: We used truck-mounted and portable extractors to remove over 200 gallons of water from carpet, subfloor, and drywall cavities.
2. Containment & Protection: To prevent cross-contamination, plastic barriers and HEPA air scrubbers were set up around the work zone.
3. Demolition: Technicians removed all affected materials—carpet, padding, laminate flooring, and drywall—up to two inches above the highest moisture line.
4. Drying & Dehumidification: Industrial dehumidifiers and air movers ran 24/7 for three days, dropping moisture levels below the 15% industry standard.
5. Antimicrobial Treatment: An EPA-approved spray was applied to exposed studs and subfloors to inhibit mold and bacterial growth.
6. Monitoring & Reporting: Moisture readings were logged twice daily and shared with the homeowner and insurance adjuster for full transparency.

Project Highlights

• Duration: 5 days (1 day extraction & demo + 4 days drying & monitoring)
• Affected area: ~200 sq ft (bedroom floor + hallway drywall)
• Water removed: ~200 gallons
• Moisture reduction: From 30% to 10% within 72 hours
• Insurance coordination: All scopes and logs approved by the homeowner’s carrier without delay

Why Fast Response Matters

Even minor leaks can escalate quickly. Within 24 hours, moisture permeates porous materials, creating fertile ground for mold spores. Our prompt extraction and drying not only protect structural elements—like joists and drywall—but also safeguard indoor air quality. As a California State-Licensed General Contractor, we ensure every restoration step meets local building standards and prevents future problems.

Five Prevention Tips

• Inspect plumbing fixtures: Check under sinks quarterly for drips or corrosion.
• Install water alarms: Place leak sensors near vanities and in closets for early alerts.
• Seal grout and caulk: Maintain watertight seals around sinks and tubs to block seepage.
• Maintain HVAC filters: Change filters every three months to ensure proper air circulation.
• Control humidity: Keep indoor levels below 50% with a dehumidifier or by running exhaust fans.

Conclusion

Don’t let a small sink leak turn into a costly mold remediation. Call JW Home Care for Water Damage Restoration in Santa Paula, CA—our IICRC-certified experts handle extraction, drying, and insurance coordination so you can relax. With our EPA-lead-safe certification and California general-contractor license, you’re in capable hands. For another success story, explore our Water Damage Project in Fillmore, CA and see how fast action saves homes.